FLUKE 62 MAX+ is a handheld non-contact infrared thermometer with a -30°C to +650°C range, Dual Laser, 12:1 distance-to-spot ratio, and IP54 protection.

FLUKE 62 MAX+ Overview

FLUKE 62 MAX+ is a handheld non-contact infrared thermometer for industrial inspection and maintenance. It enables surface-temperature measurement without direct contact with the equipment being checked.

Key functions and features

• Temperature measurement range from -30°C to +650°C.
• Dual Laser for measurement-area targeting and a 12:1 distance-to-spot ratio.
• Adjustable emissivity from 0.10 to 1.00.
• MIN/MAX/AVG/DIF functions, HI/LO alarm, and backlit display.
• Selectable °C/°F units and operation from one AA battery.
• IP54 protection rating and 3 m drop test.

Applications

• Surface-temperature checks on electrical panels, MCCs, circuit breakers, contactors, terminals, busbars, fuses, and cable connections.
• Checks on motor housings, bearing areas, couplings, gearboxes, and areas showing abnormal heating.
• Checks on pipes, ducts, vents, coils, compressors, refrigeration, and HVAC systems.
• Surface checks on tanks, piping, steam lines, thermal systems, and production equipment.

Selection and use guidance

The instrument is suited to periodic surface-temperature inspections in factories, M&E facilities, and MRO maintenance work. For trend monitoring, measure the same location repeatedly and compare readings between inspections. Use the Dual Laser to target the measurement area, and consider the 12:1 distance-to-spot ratio when selecting the measuring distance.

Technical and safety notes

FLUKE 62 MAX+ measures surface temperature by infrared and does not measure internal object temperature. Set emissivity appropriately for the measured surface. The laser is IEC 60825-1 Class 2; follow laser safety instructions during use. Non-contact measurement is useful for hot, moving, or difficult-to-reach surfaces, but it does not eliminate all safety risks.

Application suitability must be checked against technical data, operating conditions and installation requirements.

Verify technical ratings, environment, load, mounting, standards and required accessories before selection.

No verified manufacturer document is linked yet; add datasheet/catalogue/manual before approval.